Wince6使用K9F4G08U0A升级至512MNandFlash

1. WINCE600PLATFORMSMDKV210SRCCOMMONNANDFLASHFMDcfnand.h中只需要在这个数组里面增加K9F4G08U0A相关的参数

static NAND_FLASH_SPEC		g_supportedNAND[] = 
{
	{0xEC,0xDC,SLC_NAND,4096,64,2112,2048,7,7},//K9F4G08U0A
	{0xEC,0xDA,//K9F2G08U0A
	{0xEC,0xF1,1024,//K91FG08U0C
	{0x00,0x00,0}
};

2. WINCE600PLATFORMSMDKV210SRCBOOTLOADERSTEPLDRnand.c中，做如下修改：

void NAND_Init(void)
{
    DWORD ReadID;

	BYTE cMID,cDID;
	
    // Configure BUS Width and Chip Select for NAND Flash

    // Initialize NAND Flash Controller
    rNFCONF = (TACLS << 12) | (TWRPH0 <<  8) | (TWRPH1 <<  4) | (0<<0); 
    rNFCONT = (0<<17)|(0<<16)|(0<<10)|(0<<9)|(0<<8)|(1<<7)|(1<<6)|(1<<5)|(1<<4)|(0x3<<1)|(1<<0);
    rNFSTAT = (1<<4);

    NF_Reset();

    // Get manufacturer and device codes.
    if (!ReadFlashID(&ReadID))
    {
        //Uart_SendString("ID Errn");
        //Uart_SendDWORD(ReadID,1);
        //Uart_SendString("!n");
    }

    cMID = NF_GET_MID(ReadID);
    cDID = NF_GET_DID(ReadID);

    switch(cMID)
    {
    	case 0xEC:
    	{
    		switch(cDID)
    		{
    			case 0xDA:		// Samsung 2Gbit SLC - K9F2G08U0A
    			{
    				g_bLargeBlock = TRUE;
    				NEED_EXT_ADDR = TRUE;
    				break;
    			}

				case 0xDC:		// Samsung 4Gbit SLC - K9F4G08U0A,Brian Liu
				{
					g_bLargeBlock = TRUE;
					NEED_EXT_ADDR = TRUE;
    				break;
				}

		    	case 0xF1:		// Samsung 1Gbit SLC - K91FG08U0C
    			{
    				g_bLargeBlock = TRUE;
    				NEED_EXT_ADDR = FALSE;
    				break;
    			}

    			default:
    				// Not supported NAND
					while(1);
    				break;
    		}

			break;    		
    	}

    	default:
    		// Not supported NAND
    		while(1);
    		break;
    }
}

完毕。