加入收藏 | 设为首页 | 会员中心 | 我要投稿 李大同 (https://www.lidatong.com.cn/)- 科技、建站、经验、云计算、5G、大数据,站长网!
当前位置: 首页 > 百科 > 正文

ruby-on-rails – libv8-3.16.14.3无法安装 – Rails 4.1.8

发布时间:2020-12-16 19:31:00 所属栏目:百科 来源:网络整理
导读:所以我有这个问题,其中libv8-3.16.14.3无法安装,即使它欺骗性地告诉你它确实安装. 所以问题的第一个迹象就是: An error occurred while installing libv8 (3.16.14.3),and Bundler cannot continue.Make sure that `gem install libv8 -v '3.16.14.3'` succ
所以我有这个问题,其中libv8-3.16.14.3无法安装,即使它欺骗性地告诉你它确实安装.

所以问题的第一个迹象就是:

An error occurred while installing libv8 (3.16.14.3),and Bundler cannot continue.
Make sure that `gem install libv8 -v '3.16.14.3'` succeeds before bundling.

在捆绑安装期间.所以我做了一些谷歌搜索,遇到this response运行时:

gem install libv8 -v '3.16.14.3' -- --with-system-v8
Building native extensions with: '--with-system-v8'
This could take a while...
Successfully installed libv8-3.16.14.3
Parsing documentation for libv8-3.16.14.3
Done installing documentation for libv8 after 1 seconds
1 gem installed

引导您认为它有效.但再次运行bundle install并查看有问题的错误:

An error occurred while installing libv8 (3.16.14.3),and Bundler cannot continue.
Make sure that `gem install libv8 -v '3.16.14.3'` succeeds before bundling.

整个跟踪日志可以在下面看到(由运行bundle install引起):

Gem::Ext::BuildError: ERROR: Failed to build gem native extension.

    /Users/Adam/.rvm/rubies/ruby-2.1.5/bin/ruby extconf.rb 
creating Makefile
Compiling v8 for x64
Using python 2.7.6
Configured with: --prefix=/Applications/Xcode.app/Contents/Developer/usr --with-gxx-include-dir=/usr/include/c++/4.2.1
Unable to find a compiler officially supported by v8.
It is recommended to use GCC v4.4 or higher
Using compiler: g++
Configured with: --prefix=/Applications/Xcode.app/Contents/Developer/usr --with-gxx-include-dir=/usr/include/c++/4.2.1
Unable to find a compiler officially supported by v8.
It is recommended to use GCC v4.4 or higher
../src/cached-powers.cc:136:18: error: unused variable 'kCachedPowersLength' [-Werror,-Wunused-const-variable]
static const int kCachedPowersLength = ARRAY_SIZE(kCachedPowers);
                 ^
1 error generated.
make[1]: *** [/Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/vendor/v8/out/x64.release/obj.target/preparser_lib/src/cached-powers.o] Error 1
make: *** [x64.release] Error 2
/Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/ext/libv8/location.rb:36:in `block in verify_installation!': libv8 did not install properly,expected binary v8 archive '/Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/vendor/v8/out/x64.release/obj.target/tools/gyp/libv8_base.a'to exist,but it was not found (Libv8::Location::Vendor::ArchiveNotFound)
    from /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/ext/libv8/location.rb:35:in `each'
    from /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/ext/libv8/location.rb:35:in `verify_installation!'
    from /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/ext/libv8/location.rb:26:in `install!'
    from extconf.rb:7:in `<main>'
GYP_GENERATORS=make 
    build/gyp/gyp --generator-output="out" build/all.gyp 
                  -Ibuild/standalone.gypi --depth=. 
                  -Dv8_target_arch=x64 
                  -S.x64  -Dv8_enable_backtrace=1 -Dv8_can_use_vfp2_instructions=true -Darm_fpu=vfpv2 -Dv8_can_use_vfp3_instructions=true -Darm_fpu=vfpv3
  CXX(target) /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/vendor/v8/out/x64.release/obj.target/preparser_lib/src/allocation.o
  CXX(target) /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/vendor/v8/out/x64.release/obj.target/preparser_lib/src/atomicops_internals_x86_gcc.o
  CXX(target) /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/vendor/v8/out/x64.release/obj.target/preparser_lib/src/bignum.o
  CXX(target) /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/vendor/v8/out/x64.release/obj.target/preparser_lib/src/bignum-dtoa.o
  CXX(target) /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3/vendor/v8/out/x64.release/obj.target/preparser_lib/src/cached-powers.o

extconf failed,exit code 1

Gem files will remain installed in /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/gems/libv8-3.16.14.3 for inspection.
Results logged to /Users/Adam/Dropbox/AisisGit/AisisPlatform/.bundle/gems/extensions/x86_64-darwin-14/2.1.0/libv8-3.16.14.3/gem_make.out
An error occurred while installing libv8 (3.16.14.3),and Bundler cannot continue.
Make sure that `gem install libv8 -v '3.16.14.3'` succeeds before bundling.

到底是怎么回事.

注意:我在mac上做这一切.

解决方法

我首先使用Homebrew来安装V8,这样才能工作:
$brew install v8

然后运行您在Google上找到的命令:

$gem install libv8 -v '3.16.14.3' -- --with-system-v8

最后重新运行bundle install:

$bundle install

(编辑:李大同)

【声明】本站内容均来自网络,其相关言论仅代表作者个人观点,不代表本站立场。若无意侵犯到您的权利,请及时与联系站长删除相关内容!

    推荐文章
      热点阅读