Error 5054
Message:
??BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)?
Meaning:
?The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to
Solution:
?
- Ensure you're using the correct files. If you're sure they are,then try formatting before flashing again
Initialize scatter failed
?Error: Initialize scatter file failed. Please check the scatter file name you load is legal
?SP Flash tool doesn't accept the name format of your scatter file
Ensure the scatter file wasn't renamed. If you're certain it wasn't,try a higher version of SP Flash tool
Error 8038
?Error 8038! Android download ?pmt is ready and layout has been changed
?SP Flash tool is having trouble writing to certain partitions due to some incompatibility?
Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download
If Download doesnt work then do a firmware upgrade
If the MTK backup contains more than one scatter file,retry flashing with the other scatter file.
If that isn't feasible,try formatting first or use firmware upgrade
If that doesn't work,open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing "__NODL_" .?
Error 4032
?BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail?
?The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings?
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Probably have the wrong driver installed.?Uninstall vcom,?preloader and MTK drivers using usb deview then manually re-install using ?https://forum.hovatek.com/thread-440.html
Delete the sp flash tool folder then re-extract?
Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.?
If that doesn't work,keep ?holding ?down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase,power + volume decrease or power + volume increase).
Consider using the latest version of Sp Flash tool
Format the phone before trying to flash the file(s) again
Error 5056
?BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)?
??The size of a file is larger than the available / possible partition size
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Try another stock ROM
Change the phone's emmc chip
Error 4001
?S_FT_DA_NO_RESPONSE or?Da didn't send response data to FlashTool!
?SP flash tool is having difficulty communicating with the device
??
- Change the USB-port?
- Run SP flash tool as Admin
- Ensure to install the correct drivers (see?https://forum.hovatek.com/thread-440.html?)
- Try another PC and USB cord
- Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing
Sp flash tool was successful but phone's calibration doesn't work
?Soft keys and touch screen don't work / respond
Solution:
- Edit the scatter file using Notepad++ and remove NODL__? (or set is_download: false to is_download:?true ) in front of the items?you have in the backup folder but aren't listed when you load the scatter file in SP flash tool. This way,these items will become listed when? next you load the scatter file (after saving of course) and therefore flashable
Error 4008
?BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)?
?SP Flash tool encountered an error while attempting to flash files
Ensure the battery is in the phone and the phone is switched off before connecting for flashing
Try using a higher version of SP flash tool
Change the USB cord and port or PC
Use the format option then download in SP flash tool
Error 3149
?BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
?SP Flash tool was unable to flash files to the phone
Ensure to run the latest version of?SP flash tool?as Administrator
Format first then Download
Don't tick a box with an unspecified / empty file path
Ensure the phone is switched off (with a well charged battery in it?) before connecting to PC for flashing
Try a different PC
Try a different ROM
Try a different USB cord
Try formatting the phone first before flashing files to it
Error 3168?
?BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
?Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.
Ensure you're using the ROM for the exact phone model
Try a higher version of SP flash tool
Ensure to install the correct drivers for the phone on the PC
Error 2004?
?BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)
?There was an interruption in the communication between SP flash tool and the device
Take out and reinsert the battery
Try using a different USB cord,port and PC
Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
Try a different USB cord
Try a different port on the PC or another PC
Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
USB device not recognized
?USB device not recognized prompt at system tray after connecting? the phone to PC
?The PC is having problems communicating with the phone (often?due to interruption,hardware or driver problems)
Follow the guide @?https://forum.hovatek.com/thread-808.html
?Try a different USB cord,PC port or PC
Error 1013?
?BROM ERROR:S_COM_PORT_OPEN Fail(1013)
?SP flash tool encountered an error while attempting to communicate with the phone via the target port
Try using a different port on the PC
Try a different version of SP flash tool
Install VCOM drivers using ?https://forum.hovatek.com/thread-440.html
Ensure the phone is switched off with battery inside before connecting to the PC for flashing
Try using a different PC
Try changing the USB cord
Ensure the phone's USB port isn't damaged
Error 2020?
?BROM ERROR :?S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
?SP flash tool encountered a problem moving the files to be flashed into the phone's internal SRAM
Use the latest version of SP flash tool
In SP flash tool,navigate to Options > Option > Connection > Battery. Set it to "with battery".?
Use the Format all + Download option
Hold both volume buttons before connecting to the PC for flashing and release once flashing begins
Error 5007?
?BROM ERROR :?S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
?You're trying to flash an item with an unspecified path (no file selected for the ticked item/box)
Ensure the scatter file is in the same directory as the other file(s) to be flashed
Untick any item whose file you do not have or whose path is not specified; yet,is ticked / selected for flashing
Error 4010
?BROM ERROR : S_FT_FORMAT_FAIL
?The blocks map in the scatter file doesn't match the phone's partition sizes
?Try using the latest version of Sp flash tool
Try using another firmware for the exact phone model
Error 3182
?BROM ERROR: S_STORAGE_NOT_MATCH (3182)
?The ROM your're trying to flash is not compatible with the target device
Download the ROM for the exact phone model you're trying to flash
Ensure to install VCOM drivers on the PC
Don't tick any box (after loading the scatter file) without a file path / whose corresponding file has not been automatically or manually loaded.
Error 6012
?BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012),MSP ERROR CODE: 0X00
?The Download-Agent being used is incompatible with the phone
Set Download-Agent to?MTK_AllInOne_DA.bin
Error 1042
?BROM ERROR: S_TIMEOUT (1042)
?The flashing process took too long so SP flash tool encountered a timeout
Try flashing one file at a time
Use the latest version of SP flash tool
Try using a different PC and USB cord
Try Infinix Flash tool @?https://forum.hovatek.com/thread-9224.html
Error 2
?BROM ERROR: ?? (2)
?SP Flash tool was unable to communicate with the phone
Try using a different PC (preferably Windows 7 or lower)
Install the correct VCOM drivers for your PC's OS and architecture (32 or 64 bit)
Try another USB cord
Error 2005
?BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
?The device attempted to power on before SP flash tool could flash files to it
Ensure the battery is well charged
Take out and reinsert the battery
Try using a different USB cord,port and PC
Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
Try a different USB cord
Try a different port on the PC or another PC
Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
Do not hold any button when connecting to PC
Error 4058
?BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
?SP flash tool was unable to locate the partition you're trying to flash to
- Untick any item (box) with a blank or empty Location
Error 3178
?BROM_ERROR_S_STORAGE_NOT_MATCH (3178)
?The firmware you are trying to flash isnt compatible with your phone
Try flashing another firmware for your exact phone model / variant
Error 8406
?SP FLASH TOOL ERROR (8406)
?There is some compatibility problem interrupting the flashing process
Try flashing another firmware for your exact model
Update VCOM drivers for the device under Device manager
Error 1012
?BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)
?The version of SP flash tool you're using doesn't support the size(s) of the file(s) in the firmware / stock ROM.
Use the latest version of SP flash tool
Error 3140
?BROM ERROR : S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED
?SP flash tool encountered an error flashing a selected file to a non-specified partition
Try using the latest version of SP flash tool
Use the format option then download in SP flash tool
Error 8417
??BROM ERROR: Initialize scatter file failed. Please check the scatter file name you load is legal?
?The format of the scatter file is invalid
Open the scatter file in Notepad++,the first line must begining with:
############################################################################################################## General Setting #
If there is anything else above this then delete it and save the scatter file
Error 6047
?BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL
?Hash (integrity) check of the images being flashed failed.
Use SP Flash Tool V5.1516.00 @?https://adf.ly/1ZI3Ym
Ensure to select the right Download-Agent
Navigate to Options > Option > Download and untick DA DLL All.....
Error 6010
?BROM ERROR: SP FLASHTOOL ERROR 6010 CODE DOWNLOAD FORBIDDEN
?The phone has a protected bootloader
Untick Preloader and flash the rest
Error: 0xFDA
?BROM ERROR: S_FT_GET_MEMORY_FAIL (0xFDA)
?SP Flash tool encountered an error reading the phone's storage
Try using a different USB Port,Cord and PC
Error 0x13BE
?S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Error:?? (0x3)
?BROM ERROR:?? (0x3)
?SP Flash tool encountered an error maintaining a connection to the device during flashing
Solution
- Reinstall the VCOM drivers
- Try a different PC and USB cord
- The scatter file needs to be modified using?https://forum.hovatek.com/thread-12719.html
PRO_INFO: Failed to get PMT info
?PRO_INFO: Failed to get PMT info
?SP flash tool is having problems reading the phone
Try using a different PC and USB cord
Ensure the phone is switched off (with a charged battery inside) when you connect
Error 0x7D4
?BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL
?SP Flash tool encountered an error writing to the phone?
Try changing the Download Agent setting
Try using a different USB cord,PC port and PC
Use the latest version of SP flash tool
Ensure the battery is well charged and the phone's USB port isn't faulty
Ensure the file name matches what's in the scatter file
Error 6124
?BROM ERROR: S_SECURITY_INVALID_PROJECT (6124),MSO ERROR CODE: 0X00
?Wrong flash settings or firmware
?Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
Go to ?Options > Option > Connection > USB Speed > Full Speed
Go to ?Options > Option > Download > Untick DA DL All with Checksum
Error 0x8
?BROM ERROR: ?? (0x8)
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Try another stock ROM
Change the phone's emmc chip
Try using a different PC
Error OXFC0
?BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)?
Error 0X411
?BROM ERROR: S_CHKSUM_ERROR (0X411)
?There was a checksum error when flashing the firmware
Delete any file with checksum in its name from the firmware folder
Go to Options > Option > Download > Untick Da DL all with checksum
Error 0xFA1
?BROM ERROR : S_FT_DA_NO_RESPONSE (0xFA1)
?SP Flash tool encountered an error communicating with the device
Try using a different port,PC and USB cord
Ensure the phone is switched off with a charged battery inside
Do not hold any button when connecting for flashing
Ensure to install VCOM drivers @?https://forum.hovatek.com/thread-440.html
Error 4017
?BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)
?You're trying to flash a file that has not been processed for flashing in SP flash tool
If you're using an MTK Droid tools backup then ensure to carry out Phase II @?https://forum.hovatek.com/thread-468.html
TOOL DL image Fail !
?TOOL DL image Fail !
?The firmware was flashed with Da DL all with Checksum disabled
In SP flash tool,navigate to Options > Option > Download > Tick Da Dl all with checksum > Reflash the firmware
Please select one ROM at least before execution
?Please select one ROM at least before execution
?SP flash tool fails to recognize that there is an item ticked
Select the scatter file again and untick all items you do not wish to flash one after the other. Don't use the checkbox beside "Name" in SP flash tool
Error 0xFC0
?BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)
Error: 0xC0050003
?BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)
?There was an interruption during writing to one or more partitions
Repeat flashing with the latest version of SP Flash Tool
Try using a different Port,USB cord and PC
Error: 0xc002002A
?BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)
Error 0XFA8
?BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)
Ensure the battery is in the phone and the phone is switched off before connecting for flashing
Try using the latest version of SP flash tool
Change the USB cord and port or PC
Use the format option then download in SP flash tool
Try changing the Download Agent setting in SP Flash tool
Error 0x7D5
?BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)
Boundary Check Failed
?Boundary Check Failed: rom_end_addr >= next rom begin_addr.
?The firmware has a partition that wasn't included while backing up the firmware. SP flash tool encounters an error in the end address of the preloader partition and the begin address of PGPT partition (i.e the partition which wasn't included in the backup)?
Close the error message,?then manually select the location of all files in the scatter file from the bottom to the top. Meaning that preloader would be the last thing you'll select
If that doesn't work,open and modify the scatter file using Notepad++ then change "boundary_check: True" to "boundary_check: False"
If after modifying the scatter file and you still encounter the same or?a different error,then flash the firmware?using miracle box @?https://forum.hovatek.com/thread-14106.html
Error 3179
?BROM ERROR : S_CHIP_TYPE_NOT_MATCH (3179)
Error 5073
?BROM ERROR : S_DL_READ_PT_FAIL (5073)
?SP flash tool encountered an error while trying to format the device
Use "download only" under the download tab to flash the firmware then you can format if need be.
SP Flash Tool force-closes when scatter file is loaded
?SP Flash tool automatically closes after selecting a scatter file
?SP Flash Tool doesn't support the scatter file due to its blocks or configuration
Open the scatter file using Notepad++ > ?Locate the last partition on the list (flashinfo) > change is_download from true to false > Save the scatter file and reload
Storage type mismatch!
?scatter storage type is HW_STORAGE_EMMC
target storage type is?HW_STORAGE_NAND
?There's a mismatch between the phone's storage type and that which the scatter file expects
Try using a different firmware or a Chinese box @?https://forum.hovatek.com/forum-97.html
Try a different version of SP Flash tool and run as Administrator
Error 8045
?No Valid Partition Management Table (PMT) for storage
?SP Flash tool encountered a problem identifying the device's partitions ahead of file writes
Try Flashing the firmware using Download only
Error 1041
?BROM ERROR: S_CHKSUM_ERROR (1041)
0x00
?BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128),sans-serif; font-size:14px; line-height:23.7999992370605px">??The ROM contains a Checksum file but DL All With CheckSum was unticked
Ensure to tick DL All With CheckSum under Options > Option > Download
BROM ERROR : S_SECURITY_SECRO_HASH_INCORRECT (6126),MSP ERROE CODE : 0x00
?BROM ERROR : S_SECURITY_SECRO_HASH_INCORRECT (6126),MSP ERROE CODE : 0x00
Error 0xC0050005
?ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)
?
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Error (3)
?BROM ERROR: ?? (3)
?There's a problem with the format of the scatter file or file(s) being flashed. An example is trying to flash .bin files using SP Flash Tool
Check the scatter file and files you're about flashing to be sure they're not meant to be flashed using a different tool
Error 6104
??BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104),MSP ERROR CODE : 0X00
Error 3183?
?BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3183)
Ensure you're using the ROM for the exact phone model
Try a higher version of SP flash tool
Ensure to install the correct drivers for the phone on the Pc
Error 0xC0060001
?BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)
PMT changed for the ROM
?PMT changed for the ROM; it must be downloaded
?The partition table about to be written (from the scatter file) is different from the phone's current partition table layout
Ensure that the scatter file / files you're trying to flash are actually for your exact model
If you're trying to flash just a few files and not the firmware then you need to get the firmware to complement and then flash using download only
If you're trying to flash the full firmware then try using the Firmware Upgrade option or Format first before download only
Error 6004
?ERROR: S_SECURITY_SLA_FAIL (6004),MSP ERRORE CODE: 0X00
?The download agent isn't compatible with the device
Try choosing a different Download Agent,version or tool
Ensure you're using the right Authentication file
?
scatter storage type is HW_STORAGE_EMMC
target storage type is HW_STORAGE_NONE
Try using SP Flash tool Version 3.x
Error 6045
?S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045),sans-serif; font-size:14px; line-height:23.7999992370605px">?The image files you are trying to flash doesn't contain the -sign header.
Use SP Flash Tool V5.1532.00 @?https://forum.hovatek.com/thread-13970.html
