oracle linux 4.8安装oracl 10g rac错误解决

1.初使化asm自动存储驱动出错,找不到模块

[root@rac10g01 Desktop]# /etc/init.d/oracleasm configure

Configuring the Oracle ASM library driver.

This will configure the on-boot properties of the Oracle ASM library

driver. The following questions will determine whether the driver is

loaded on boot and what permissions it will have. The current values

will be shown in brackets ('[]'). Hitting <ENTER> without typing an

answer will keep that current value. Ctrl-C will abort.

Default user to own the driver interface []: oracle

Default group to own the driver interface []: dba

Start Oracle ASM library driver on boot (y/n) [n]: yy

Invalid response: yy

Start Oracle ASM library driver on boot (y/n) [n]: y

Scan for Oracle ASM disks on boot (y/n) [y]:

Writing Oracle ASM library driver configuration: done

Initializing the Oracle ASMLib driver: [FAILED]

[root@rac10g01 ~]# tailf /var/log/oracleasm --错误日志

Creating /dev/oracleasm mount point: /dev/oracleasm

Loading module "oracleasm": failed

Unable to load module "oracleasm"

Unable to load module "oracleasm"

解决方法:

[root@rac10g01 Desktop]# find / -name oracleasm.ko

/lib/modules/2.6.9-89.35.1.EL/kernel/drivers/addon/oracleasm/oracleasm.ko

[root@rac10g01 Desktop]# insmod /lib/modules/2.6.9-89.35.1.EL/kernel/drivers/addon/oracleasm/oracleasm.ko --手动加载模块

[root@rac10g01 Desktop]#

2.在rac节点2找不到asm磁盘

[root@rac10g01 ~]# /etc/init.d/oracleasm scandisks

Scanning the system for Oracle ASMLib disks: [ OK ]

[root@rac10g01 ~]# /etc/init.d/oracleasm listdisks

[root@rac10g01 ~]#

解决方法:

(1).关闭Selinux

(2).检查两个节点的磁盘顺序,根据磁盘的空间大小和磁盘设备号.两边的顺序必须一至,否则节点2检查不到asm磁盘

3.主机名与IP地址没有解析

Checking Network Configuration requirements ...

Check complete. The overall result of this check is: Not executed <<<<

Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However,the primary network

interface on the system should be configured with a static IP address in order for the Oracle Software to function properly.

See the Installation Guide for more details on installing the software on systems configured with DHCP.

=======================================================================

Validating ORACLE_BASE location (if set) ...

Check complete. The overall result of this check is: Passed

=======================================================================

[root@rac10g01 ~]# vim /etc/hosts

192.168.3.30 localhost.localdomain localhost --添加这行(两个节点各自写自己的IP地址)

[root@rac10g01 ~]#

（编辑：李大同）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!