domain-name-system – 必须重新启动Bind9才能使DNS服务器在每次
我跟着
this very nice tutorial在Debian Jessie上创建了我的第一个DNS服务器(在我的Raspberry Pi上).它似乎运作良好.我可以ping:
ping myhostname.mydomain 它工作正常.问题是每次我重启我的覆盆子Pi,我必须运行 sudo service bind9 restart 否则DNS服务器将无法启动我的配置,我的DNS定义将无法正常工作.现在我必须说,如果我运行htop,我可以看到bind9在那里运行,但是,我做ping,我得到的主机名不存在.只有在我手动重启bind9后,DNS服务器才会再次运行. 我不得不说,虽然我一直试图解决这个问题,但是我让bind9运行through Chroot as explained in the Debian page,但这没有用. 我对此仍然很陌生,所以请询问您是否需要任何其他信息.我不知道从哪里开始寻找bind9的问题来解决这个问题. 注意:我是从全新安装开始的. 根据评论中的问题进行更新: dig myhostname.mydomain 给出超时: ; <<>> DiG 9.9.5-9+deb8u3-Raspbian <<>> myhostname.mydomain ;; global options: +cmd ;; connection timed out; no servers could be reached 命令netstat -plnut返回 (Not all processes could be identified,non-owned process info will not be shown,you would have to be root to see it all.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:6010 0.0.0.0:* LISTEN - tcp6 0 0 :::80 :::* LISTEN - tcp6 0 0 :::53 :::* LISTEN - tcp6 0 0 :::22 :::* LISTEN - tcp6 0 0 ::1:953 :::* LISTEN - tcp6 0 0 ::1:6010 :::* LISTEN - udp 0 0 127.0.0.1:53 0.0.0.0:* - udp 0 0 0.0.0.0:68 0.0.0.0:* - udp 0 0 192.168.1.2:123 0.0.0.0:* - udp 0 0 127.0.0.1:123 0.0.0.0:* - udp 0 0 0.0.0.0:123 0.0.0.0:* - udp 0 0 0.0.0.0:48851 0.0.0.0:* - udp 0 0 0.0.0.0:5353 0.0.0.0:* - udp6 0 0 :::546 :::* - udp6 0 0 :::53 :::* - udp6 0 0 2003:75:e15:c201:52:123 :::* - udp6 0 0 fe80::ba27:ebff:fe7:123 :::* - udp6 0 0 ::1:123 :::* - udp6 0 0 :::123 :::* - udp6 0 0 :::53420 :::* - udp6 0 0 :::5353 :::* - 重新启动后,这两行将被添加,属于DNS服务器: tcp 0 0 192.168.1.2:53 0.0.0.0:* LISTEN - udp 0 0 192.168.1.2:53 0.0.0.0:* - 解决方法
1)处理DHCP延迟的自定义脚本.
(以root / sudo创建文件) cat /usr/local / sbin / network-check #!/bin/bash while ! ifconfig | grep "192.168.1." > /dev/null; do #Network Down sleep 1 done #Network up restart bind9 service bind9 restart chmod a x /usr/local / sbin / network-check 在/etc/rc.local中的exit 0之前添加一行 network-check exit 0 然后重启 2)设置静态,网络将以IP开始,然后bind9将启动(并使用该IP) (编辑:李大同) 【声明】本站内容均来自网络,其相关言论仅代表作者个人观点,不代表本站立场。若无意侵犯到您的权利,请及时与联系站长删除相关内容! |