Vim光标跳到缓冲切换后的行的开始处

发布时间：2020-12-15 09:07:43 所属栏目：安全来源：网络整理

导读：当我切换缓冲区然后回到它(基本上当我回到以前打开的任何缓冲区)，光标放置在行的开始，丢失前一个位置在行。这是非常讨厌，也许有人知道如何解决这个问题？您可以使用该设置 :se nostartofline 或短： :se nosol 文档： *'startofline'* *'sol'* *'nostart

当我切换缓冲区然后回到它(基本上当我回到以前打开的任何缓冲区)，光标放置在行的开始，丢失前一个位置在行。这是非常讨厌，也许有人知道如何解决这个问题？

您可以使用该设置

:se nostartofline

或短：

:se nosol

文档：

*'startofline'* *'sol'* *'nostartofline'* *'nosol'*
'startofline' 'sol' boolean (default on)`

        global
        {not in Vi}
When "on" the commands listed below move the cursor to the first
non-blank of the line.  When off the cursor is kept in the same column
(if possible).  This applies to the commands: CTRL-D,CTRL-U,CTRL-B,CTRL-F,"G","H","M","L",gg,and to the commands "d","<<" and ">>"
with a linewise operator,with "%" with a count and to buffer changing
commands (CTRL-^,:bnext,:bNext,etc.).  Also for an Ex command that
only has a line number,e.g.,":25" or ":+".
In case of buffer changing commands the cursor is placed at the column
where it was the last time the buffer was edited.
NOTE: This option is set when 'compatible' is set.

（编辑：李大同）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!