linux – RTNETLINK答案：参数无效

发布时间：2020-12-14 02:34:03 所属栏目：Linux 来源：网络整理

导读：当我的系统启动时,它会显示以下消息. Bringing up loopback interface: [ OK ]Bringing up interface eth0: RTNETLINK answers: Invalid argument[ OK ]Bringing up interface eth1: RTNETLINK answers: Invalid argument[ OK ]Bringing up interface eth2:

当我的系统启动时,它会显示以下消息.

Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  RTNETLINK answers: Invalid argument
[  OK  ]
Bringing up interface eth1:  RTNETLINK answers: Invalid argument
[  OK  ]
Bringing up interface eth2:  RTNETLINK answers: Invalid argument
[  OK  ]
Bringing up interface eth3:  RTNETLINK answers: Invalid argument
[  OK  ]

为什么会这样呢？通常它不会给RTNETLINK回复消息：无效的参数

我做了ifconfig,输出是

eth0      Link encap:Ethernet  HWaddr 00:00:50:6D:56:B4  
          inet addr:120.0.10.137  Bcast:120.0.255.255  Mask:255.255.255.0
          inet6 addr: fe80::200:50ff:fe6d:56b4/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:214 (214.0 b)
          Base address:0xa000 

eth1      Link encap:Ethernet  HWaddr 00:00:50:6D:56:B5  
          inet addr:121.0.10.137  Bcast:121.0.255.255  Mask:255.255.255.0
          inet6 addr: fe80::200:50ff:fe6d:56b5/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:214 (214.0 b)
          Base address:0xc000 

eth2      Link encap:Ethernet  HWaddr 00:00:50:6D:56:B6  
          inet addr:128.0.10.137  Bcast:128.0.255.255  Mask:255.255.255.0
          inet6 addr: fe80::200:50ff:fe6d:56b6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1006 (1006.0 b)  TX bytes:396 (396.0 b)
          Interrupt:16 

eth3      Link encap:Ethernet  HWaddr 00:00:50:6D:56:B7  
          inet addr:123.0.10.137  Bcast:123.0.255.255  Mask:255.255.255.0
          inet6 addr: fe80::200:50ff:fe6d:56b7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:728 (728.0 b)  TX bytes:396 (396.0 b)
          Interrupt:17 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:980 (980.0 b)  TX bytes:980 (980.0 b)

消息的原因是什么以及如何将其更改为正常？

谢谢

解决方法

我的猜测是你已经改变了你的IP地址.请确保IP地址,掩码和网关属于同一类(A类或B类或C类)

我的下一个猜测是你已经从“DHCP”变为“静态”地址.如果是这种情况,请确保管理员已从DHCP作用域中删除了IP地址,因为DHCP作用域是该地址的所有者.你的配置看起来应该是这样的

root@servername network-scripts]# vi ifcfg-eth0

DEVICE=eth0
BOOTPROTO=static
IPADDR=10.206.2.4
GATEWAY=10.206.255.255
NETMASK=255.255.0.0


root@servername network-scripts]# service network restart

希望这是一个帮助

（编辑：李大同）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!