为什么我的ZFS池在Linux上使用ZFS不能扩展？

我在 Linux上有一个ZFS zpool,内核为2.6.32-431.11.2.el6.x86_64,它有一个vdev. vdev是SAN设备.我扩展了SAN的大小,尽管zpool将autoexpand设置为on,但即使重新启动计算机,导出/导入池,并使用zpool online -e,我也无法让池扩展.我确信vdev更大,因为fdisk显示它已从215GiB增加到250 GiB.以下是我所做的一个示例：

[root@timestandstill ~]# zpool list
NAME          SIZE  ALLOC   FREE    CAP  DEDUP  HEALTH  ALTROOT
dfbackup      214G   207G  7.49G    96%  1.00x  ONLINE  -
[root@timestandstill ~]# zpool import -d /dev/disk/by-id/
   pool: dfbackup
     id: 12129781223864362535
  state: ONLINE
 action: The pool can be imported using its name or numeric identifier.
 config:

    dfbackup             ONLINE
      virtio-sbs-XLPH83  ONLINE
[root@timestandstill ~]# zpool import -d /dev/disk/by-id/ dfbackup
[root@timestandstill ~]# zpool list
NAME          SIZE  ALLOC   FREE    CAP  DEDUP  HEALTH  ALTROOT
dfbackup      214G   207G  7.49G    96%  1.00x  ONLINE  -
venuebackup   248G   244G  3.87G    98%  1.00x  ONLINE  -
[root@timestandstill ~]# zpool get autoexpand dfbackup
NAME      PROPERTY    VALUE   SOURCE
dfbackup  autoexpand  on      local
[root@timestandstill ~]# zpool set autoexpand=off dfbackup
[root@timestandstill ~]# zpool set autoexpand=on dfbackup
[root@timestandstill ~]# zpool list
NAME          SIZE  ALLOC   FREE    CAP  DEDUP  HEALTH  ALTROOT
dfbackup      214G   207G  7.49G    96%  1.00x  ONLINE  -
venuebackup   248G   244G  3.87G    98%  1.00x  ONLINE  -
[root@timestandstill ~]# zpool status -v dfbackup
  pool: dfbackup
 state: ONLINE
  scan: none requested
config:

    NAME                 STATE     READ WRITE CKSUM
    dfbackup             ONLINE       0     0     0
      virtio-sbs-XLPH83  ONLINE       0     0     0

errors: No known data errors
[root@timestandstill ~]# fdisk /dev/disk/by-id/virtio-sbs-XLPH83

WARNING: GPT (GUID Partition Table) detected on '/dev/disk/by-id/virtio-sbs-XLPH83'! The util fdisk doesn't support GPT. Use GNU Parted.


WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').

Command (m for help): p

Disk /dev/disk/by-id/virtio-sbs-XLPH83: 268.4 GB,268435456000 bytes
256 heads,63 sectors/track,32507 cylinders
Units = cylinders of 16128 * 512 = 8257536 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

                             Device Boot      Start         End      Blocks   Id  System
/dev/disk/by-id/virtio-sbs-XLPH83-part1               1       27957   225443839+  ee  GPT

Command (m for help): q
[root@timestandstill ~]# zpool online -e dfbackup /dev/disk/by-id/virtio-sbs-XLPH83
[root@timestandstill ~]# zpool list
NAME          SIZE  ALLOC   FREE    CAP  DEDUP  HEALTH  ALTROOT
dfbackup      214G   207G  7.49G    96%  1.00x  ONLINE  -
venuebackup   248G   244G  3.87G    98%  1.00x  ONLINE  -
[root@timestandstill ~]# zpool status -v dfbackup
  pool: dfbackup
 state: ONLINE
  scan: none requested
config:

    NAME                 STATE     READ WRITE CKSUM
    dfbackup             ONLINE       0     0     0
      virtio-sbs-XLPH83  ONLINE       0     0     0

errors: No known data errors

我该如何扩展这个zpool？

# zpool status -v
   ...
    NAME        STATE     READ WRITE CKSUM
    pool        ONLINE       0     0     0
      vdb       ONLINE       0     0     0

# zpool list
NAME   SIZE  ALLOC   FREE  EXPANDSZ   FRAG    CAP  DEDUP  HEALTH  ALTROOT
pool  39.8G  27.1G  12.7G         -    49%    68%  1.00x  ONLINE  -

# zpool set autoexpand=on pool

# partprobe
Warning: Not all of the space available to /dev/vdb appears to be used,you can fix the GPT to use all of the space (an extra 10485760 blocks) or 
continue with the current setting?

# zpool online -e pool vdb

# partprobe

# zpool list
NAME   SIZE  ALLOC   FREE  EXPANDSZ   FRAG    CAP  DEDUP  HEALTH  ALTROOT
pool  49.8G  27.1G  21.7G         -    40%    55%  1.00x  ONLINE  -