linux – Harddrive问题“只读”
发布时间：2020-12-13 16:46:11 所属栏目：Linux 来源：网络整理
导读：我有一个问题,当我在几小时后挂载我的分区后,它变为只读.目前我运行： fuser -m -k /dev/sdb1umount /dev/sdb1fsck -y /dev/sdb1mount /dev/sdb1 这允许我在读/写中重新安装它,但这是一个反复出现的问题.我的问题是如何解决这个问题.它看起来像硬件或软件问
|
我有一个问题,当我在几小时后挂载我的分区后,它变为只读.目前我运行：
fuser -m -k /dev/sdb1 umount /dev/sdb1 fsck -y /dev/sdb1 mount /dev/sdb1 这允许我在读/写中重新安装它,但这是一个反复出现的问题.我的问题是如何解决这个问题.它看起来像硬件或软件问题？ 目前这是在CentOS 64位盒子上. 当我运行dmesg时,我会看到这个： EXT3-fs error (device sdb1): ext3_lookup: unlinked inode 36127046 in dir #36126721 Aborting journal on device sdb1. __journal_remove_journal_head: freeing b_committed_data __journal_remove_journal_head: freeing b_committed_data ext3_abort called. EXT3-fs error (device sdb1): ext3_journal_start_sb: Detected aborted journal Remounting filesystem read-only “smartctl -a / dev / sdb1”返回 smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST31500341AS
Serial Number: 9VS2RH1M
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Aug 13 16:50:33 2010 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 246) Self-test routine in progress...
60% of test remaining.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 51209038
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 6
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 78095697
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5685
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 4295032833
189 High_Fly_Writes 0x003a 093 093 000 Old_age Always - 7
190 Airflow_Temperature_Cel 0x0022 068 057 045 Old_age Always - 32 (Lifetime Min/Max 31/35)
194 Temperature_Celsius 0x0022 032 043 000 Old_age Always - 32 (0 19 0 0)
195 Hardware_ECC_Recovered 0x001a 038 022 000 Old_age Always - 51209038
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 243150983534133
241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 230593735
242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 2219959893
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 60% 5685 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans,do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up,resume after 0 minute delay.
我最终运行“e2fsck -fy / dev / sdb1”,它给了我这个： e2fsck 1.39 (29-May-2006) /dev/sdb1: recovering journal Pass 1: Checking inodes,blocks,and sizes Pass 2: Checking directory structure Entry 'primary.sqlite' in /cache/yum/updates (36094008) has deleted/unused inode 36094073. Clear? yes Entry 'repomd.xml' in /cache/yum/c5-testing (36126721) has deleted/unused inode 36127046. Clear? yes Pass 3: Checking directory connectivity Pass 4: Checking reference counts Unattached inode 20005231 Connect to /lost+found? yes Inode 20005231 ref count is 2,should be 1. Fix? yes Inode 36094015 ref count is 1,should be 2. Fix? yes Inode 36094017 ref count is 1,should be 2. Fix? yes Unattached inode 36094024 Connect to /lost+found? yes Inode 36094024 ref count is 2,should be 1. Fix? yes Unattached inode 36094068 Connect to /lost+found? yes Inode 36094068 ref count is 2,should be 1. Fix? yes Unattached inode 36094076 Connect to /lost+found? yes Inode 36094076 ref count is 2,should be 1. Fix? yes Unattached inode 36110353 Connect to /lost+found? yes Inode 36110353 ref count is 2,should be 1. Fix? yes Inode 36110357 ref count is 1,should be 2. Fix? yes Unattached inode 36127047 Connect to /lost+found? yes Inode 36127047 ref count is 2,should be 1. Fix? yes Unattached inode 73007330 Connect to /lost+found? yes Inode 73007330 ref count is 2,should be 1. Fix? yes Unattached inode 73007331 Connect to /lost+found? yes Inode 73007331 ref count is 2,should be 1. Fix? yes Pass 5: Checking group summary information Block bitmap differences: +161978373 -161984512 +161986577 -(161990662--161990663) +(161990668--161990669) -161992704 +161992715 -161994753 +161994778 -162000900 Fix? yes Free blocks count wrong for group #356 (242,counted=240). Fix? yes Free blocks count wrong for group #375 (2086,counted=2064). Fix? yes Free blocks count wrong for group #2203 (3224,counted=3223). Fix? yes Free blocks count wrong for group #3564 (1,counted=3). Fix? yes Free blocks count wrong for group #3571 (2820,counted=2824). Fix? yes Free blocks count wrong (311466471,counted=311466452). Fix? yes Free inodes count wrong for group #2203 (16060,counted=16059). Fix? yes Free inodes count wrong (181859841,counted=181859840). Fix? yes /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** /dev/sdb1: 1296896/183156736 files (1.5% non-contiguous),54817548/366284000 blocks 我假设那是导致HD进入只读状态的原因.我会及时通知你,并告诉你问题是否再次发生. (无论哪种方式我更换硬盘) 解决方法
文件系统可能安装了选项errors = remount-ro,顾名思义表示如果检测到错误,文件系统会立即设置为只读,以避免进一步损坏.
内核日志中会有信息(大多数Linux发行版上都是/var/log/kern.log). 下一步该做什么取决于原因.以下是最有可能的： >它可能是一个失败的磁盘.通常,您会看到内核日志中报告的IO错误. smartctl -a / dev / sdb可以告诉你更多.尽快备份数据并更换磁盘.>这可能是你的RAM的一个问题.运行memtest只是为了确保.>这可能是一个内核错误.这对凡人来说很难诊断.确保为您的发行版发布了最新的内核.>由于不再适用的原因(例如现在已修复的内核错误),文件系统可能早先被损坏了.运行fsck应该可以解决问题,所以不幸的是,这种情况不适用于你. （编辑：李大同） 【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容! |