加入收藏 | 设为首页 | 会员中心 | 我要投稿 李大同 (https://www.lidatong.com.cn/)- 科技、建站、经验、云计算、5G、大数据,站长网!
当前位置: 首页 > 编程开发 > Java > 正文

java – 如何获得CRC64分布式计算(使用其线性属性)?

发布时间:2020-12-14 16:25:06 所属栏目:Java 来源:网络整理
导读:我需要散布在分布式FS上存储的大型文件上.我能够处理文件的部分比整个文件更好的性能,所以我想要能够计算零件的散列,然后求和. 我正在考虑将CRC64作为散列算法,但是我不知道如何使用理论上的“线性函数”属性,所以我可以对CRC的部分文件进行求和.任何建议?
我需要散布在分布式FS上存储的大型文件上.我能够处理文件的部分比整个文件更好的性能,所以我想要能够计算零件的散列,然后求和.

我正在考虑将CRC64作为散列算法,但是我不知道如何使用理论上的“线性函数”属性,所以我可以对CRC的部分文件进行求和.任何建议?我在这里错过了什么?

其他说明为什么我在看CRC64:

>我可以控制文件块,但由于应用性质,它们需要具有不同的大小(最多1个字节,没有任何固定的块是可能的).
>我知道有关CRC32实现(zlib),其中包括了对CRC部分进行校验的方法,但是我想要更多的内容. 8字节对我来说看起来不错.
我知道CRC很快.我想从中获利,因为文件可能真的很大(几Gb).

解决方法

决定这是一般有用的写作和提供:
/* crc64.c -- compute CRC-64
 * Copyright (C) 2013 Mark Adler
 * Version 1.4  16 Dec 2013  Mark Adler
 */

/*
  This software is provided 'as-is',without any express or implied
  warranty.  In no event will the author be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,including commercial applications,and to alter it and redistribute it
  freely,subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not
     claim that you wrote the original software. If you use this software
     in a product,an acknowledgment in the product documentation would be
     appreciated but is not required.
  2. Altered source versions must be plainly marked as such,and must not be
     misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.

  Mark Adler
  madler@alumni.caltech.edu
 */

/* Compute CRC-64 in the manner of xz,using the ECMA-182 polynomial,bit-reversed,with one's complement pre and post processing.  Provide a
   means to combine separately computed CRC-64's. */

/* Version history:
   1.0  13 Dec 2013  First version
   1.1  13 Dec 2013  Fix comments in test code
   1.2  14 Dec 2013  Determine endianess at run time
   1.3  15 Dec 2013  Add eight-byte processing for big endian as well
                     Make use of the pthread library optional
   1.4  16 Dec 2013  Make once variable volatile for limited thread protection
 */

#include <stdio.h>
#include <inttypes.h>
#include <assert.h>

/* The include of pthread.h below can be commented out in order to not use the
   pthread library for table initialization.  In that case,the initialization
   will not be thread-safe.  That's fine,so long as it can be assured that
   there is only one thread using crc64(). */
#include <pthread.h>            /* link with -lpthread */

/* 64-bit CRC polynomial with these coefficients,but reversed:
    64,62,57,55,54,53,52,47,46,45,40,39,38,37,35,33,32,31,29,27,24,23,22,21,19,17,13,12,10,9,7,4,1,0 */
#define POLY UINT64_C(0xc96c5795d7870f42)

/* Tables for CRC calculation -- filled in by initialization functions that are
   called once.  These could be replaced by constant tables generated in the
   same way.  There are two tables,one for each endianess.  Since these are
   static,i.e. local,one should be compiled out of existence if the compiler
   can evaluate the endianess check in crc64() at compile time. */
static uint64_t crc64_little_table[8][256];
static uint64_t crc64_big_table[8][256];

/* Fill in the CRC-64 constants table. */
static void crc64_init(uint64_t table[][256])
{
    unsigned n,k;
    uint64_t crc;

    /* generate CRC-64's for all single byte sequences */
    for (n = 0; n < 256; n++) {
        crc = n;
        for (k = 0; k < 8; k++)
            crc = crc & 1 ? POLY ^ (crc >> 1) : crc >> 1;
        table[0][n] = crc;
    }

    /* generate CRC-64's for those followed by 1 to 7 zeros */
    for (n = 0; n < 256; n++) {
        crc = table[0][n];
        for (k = 1; k < 8; k++) {
            crc = table[0][crc & 0xff] ^ (crc >> 8);
            table[k][n] = crc;
        }
    }
}

/* This function is called once to initialize the CRC-64 table for use on a
   little-endian architecture. */
static void crc64_little_init(void)
{
    crc64_init(crc64_little_table);
}

/* Reverse the bytes in a 64-bit word. */
static inline uint64_t rev8(uint64_t a)
{
    uint64_t m;

    m = UINT64_C(0xff00ff00ff00ff);
    a = ((a >> 8) & m) | (a & m) << 8;
    m = UINT64_C(0xffff0000ffff);
    a = ((a >> 16) & m) | (a & m) << 16;
    return a >> 32 | a << 32;
}

/* This function is called once to initialize the CRC-64 table for use on a
   big-endian architecture. */
static void crc64_big_init(void)
{
    unsigned k,n;

    crc64_init(crc64_big_table);
    for (k = 0; k < 8; k++)
        for (n = 0; n < 256; n++)
            crc64_big_table[k][n] = rev8(crc64_big_table[k][n]);
}

/* Run the init() function exactly once.  If pthread.h is not included,then
   this macro will use a simple static state variable for the purpose,which is
   not thread-safe.  The init function must be of the type void init(void). */
#ifdef PTHREAD_ONCE_INIT
#  define ONCE(init) 
    do { 
        static pthread_once_t once = PTHREAD_ONCE_INIT; 
        pthread_once(&once,init); 
    } while (0)
#else
#  define ONCE(init) 
    do { 
        static volatile int once = 1; 
        if (once) { 
            if (once++ == 1) { 
                init(); 
                once = 0; 
            } 
            else 
                while (once) 
                    ; 
        } 
    } while (0)
#endif

/* Calculate a CRC-64 eight bytes at a time on a little-endian architecture. */
static inline uint64_t crc64_little(uint64_t crc,void *buf,size_t len)
{
    unsigned char *next = buf;

    ONCE(crc64_little_init);
    crc = ~crc;
    while (len && ((uintptr_t)next & 7) != 0) {
        crc = crc64_little_table[0][(crc ^ *next++) & 0xff] ^ (crc >> 8);
        len--;
    }
    while (len >= 8) {
        crc ^= *(uint64_t *)next;
        crc = crc64_little_table[7][crc & 0xff] ^
              crc64_little_table[6][(crc >> 8) & 0xff] ^
              crc64_little_table[5][(crc >> 16) & 0xff] ^
              crc64_little_table[4][(crc >> 24) & 0xff] ^
              crc64_little_table[3][(crc >> 32) & 0xff] ^
              crc64_little_table[2][(crc >> 40) & 0xff] ^
              crc64_little_table[1][(crc >> 48) & 0xff] ^
              crc64_little_table[0][crc >> 56];
        next += 8;
        len -= 8;
    }
    while (len) {
        crc = crc64_little_table[0][(crc ^ *next++) & 0xff] ^ (crc >> 8);
        len--;
    }
    return ~crc;
}

/* Calculate a CRC-64 eight bytes at a time on a big-endian architecture. */
static inline uint64_t crc64_big(uint64_t crc,size_t len)
{
    unsigned char *next = buf;

    ONCE(crc64_big_init);
    crc = ~rev8(crc);
    while (len && ((uintptr_t)next & 7) != 0) {
        crc = crc64_big_table[0][(crc >> 56) ^ *next++] ^ (crc << 8);
        len--;
    }
    while (len >= 8) {
        crc ^= *(uint64_t *)next;
        crc = crc64_big_table[0][crc & 0xff] ^
              crc64_big_table[1][(crc >> 8) & 0xff] ^
              crc64_big_table[2][(crc >> 16) & 0xff] ^
              crc64_big_table[3][(crc >> 24) & 0xff] ^
              crc64_big_table[4][(crc >> 32) & 0xff] ^
              crc64_big_table[5][(crc >> 40) & 0xff] ^
              crc64_big_table[6][(crc >> 48) & 0xff] ^
              crc64_big_table[7][crc >> 56];
        next += 8;
        len -= 8;
    }
    while (len) {
        crc = crc64_big_table[0][(crc >> 56) ^ *next++] ^ (crc << 8);
        len--;
    }
    return ~rev8(crc);
}

/* Return the CRC-64 of buf[0..len-1] with initial crc,processing eight bytes
   at a time.  This selects one of two routines depending on the endianess of
   the architecture.  A good optimizing compiler will determine the endianess
   at compile time if it can,and get rid of the unused code and table.  If the
   endianess can be changed at run time,then this code will handle that as
   well,initializing and using two tables,if called upon to do so. */
uint64_t crc64(uint64_t crc,size_t len)
{
    uint64_t n = 1;

    return *(char *)&n ? crc64_little(crc,buf,len) :
                         crc64_big(crc,len);
}

#define GF2_DIM 64      /* dimension of GF(2) vectors (length of CRC) */

static uint64_t gf2_matrix_times(uint64_t *mat,uint64_t vec)
{
    uint64_t sum;

    sum = 0;
    while (vec) {
        if (vec & 1)
            sum ^= *mat;
        vec >>= 1;
        mat++;
    }
    return sum;
}

static void gf2_matrix_square(uint64_t *square,uint64_t *mat)
{
    unsigned n;

    for (n = 0; n < GF2_DIM; n++)
        square[n] = gf2_matrix_times(mat,mat[n]);
}

/* Return the CRC-64 of two sequential blocks,where crc1 is the CRC-64 of the
   first block,crc2 is the CRC-64 of the second block,and len2 is the length
   of the second block. */
uint64_t crc64_combine(uint64_t crc1,uint64_t crc2,uintmax_t len2)
{
    unsigned n;
    uint64_t row;
    uint64_t even[GF2_DIM];     /* even-power-of-two zeros operator */
    uint64_t odd[GF2_DIM];      /* odd-power-of-two zeros operator */

    /* degenerate case */
    if (len2 == 0)
        return crc1;

    /* put operator for one zero bit in odd */
    odd[0] = POLY;              /* CRC-64 polynomial */
    row = 1;
    for (n = 1; n < GF2_DIM; n++) {
        odd[n] = row;
        row <<= 1;
    }

    /* put operator for two zero bits in even */
    gf2_matrix_square(even,odd);

    /* put operator for four zero bits in odd */
    gf2_matrix_square(odd,even);

    /* apply len2 zeros to crc1 (first square will put the operator for one
       zero byte,eight zero bits,in even) */
    do {
        /* apply zeros operator for this bit of len2 */
        gf2_matrix_square(even,odd);
        if (len2 & 1)
            crc1 = gf2_matrix_times(even,crc1);
        len2 >>= 1;

        /* if no more bits set,then done */
        if (len2 == 0)
            break;

        /* another iteration of the loop with odd and even swapped */
        gf2_matrix_square(odd,even);
        if (len2 & 1)
            crc1 = gf2_matrix_times(odd,then done */
    } while (len2 != 0);

    /* return combined crc */
    crc1 ^= crc2;
    return crc1;
}

/* Test crc64() on vector[0..len-1] which should have CRC-64 crc.  Also test
   crc64_combine() on vector[] split in two. */
static void crc64_test(void *vector,size_t len,uint64_t crc)
{
    uint64_t crc1,crc2;

    /* test crc64() */
    crc1 = crc64(0,vector,len);
    if (crc1 ^ crc)
        printf("mismatch: %" PRIx64 ",should be %" PRIx64 "n",crc1,crc);

    /* test crc64_combine() */
    crc1 = crc64(0,(len + 1) >> 1);
    crc2 = crc64(0,vector + ((len + 1) >> 1),len >> 1);
    crc1 = crc64_combine(crc1,crc2,len >> 1);
    if (crc1 ^ crc)
        printf("mismatch: %" PRIx64 ",crc);
}

/* Test vectors. */
#define TEST1 "123456789"
#define TESTLEN1 9
#define TESTCRC1 UINT64_C(0x995dc9bbdf1939fa)
#define TEST2 "This is a test of the emergency broadcast system."
#define TESTLEN2 49
#define TESTCRC2 UINT64_C(0x27db187fc15bbc72)

int main(void)
{
    crc64_test(TEST1,TESTLEN1,TESTCRC1);
    crc64_test(TEST2,TESTLEN2,TESTCRC2);
    return 0;
}

(编辑:李大同)

【声明】本站内容均来自网络,其相关言论仅代表作者个人观点,不代表本站立场。若无意侵犯到您的权利,请及时与联系站长删除相关内容!

    推荐文章
      热点阅读