FreeSWITCH命令大全
发布时间：2020-12-14 04:45:04 所属栏目：大数据 来源：网络整理
导读：? FreeSWITCH启动即查看 FreeSWITCH一般安装在路径 /usr/local/freeswitch ，可执行程序位于/usr/local/freeswitch/bin 下，配置文件位于/usr/local/freeswitch/conf（当然这写不是绝对的，具体还要看你自己安装时候的配置） FreeSWITCH帮助命令 freeswitch
|
? FreeSWITCH启动即查看FreeSWITCH一般安装在路径 /usr/local/freeswitch ，可执行程序位于/usr/local/freeswitch/bin 下，配置文件位于/usr/local/freeswitch/conf（当然这写不是绝对的，具体还要看你自己安装时候的配置） FreeSWITCH帮助命令 freeswitch -help
‘‘‘ Usage: freeswitch [OPTIONS] These are the optional arguments you can pass to freeswitch: -nf -- no forking -reincarnate -- restart the switch on an uncontrolled exit -reincarnate-reexec -- run execv on a restart (helpful for upgrades) -u [user] -- specify user to switch to -g [group] -- specify group to switch to -core -- dump cores -help -- this message -version -- print the version and exit -rp -- enable high(realtime) priority settings -lp -- enable low priority settings -np -- enable normal priority settings -vg -- run under valgrind -nosql -- disable internal sql scoreboard -heavy-timer -- Heavy Timer,possibly more accurate but at a cost -nonat -- disable auto nat detection -nonatmap -- disable auto nat port mapping -nocal -- disable clock calibration -nort -- disable clock clock_realtime -stop -- stop freeswitch -nc -- do not output to a console and background -ncwait -- do not output to a console and background but wait until the system is ready before exiting (implies -nc) -c -- output to a console and stay in the foreground Options to control locations of files: -base [basedir] -- alternate prefix directory -cfgname [filename] -- alternate filename for FreeSWITCH main configuration file -conf [confdir] -- alternate directory for FreeSWITCH configuration files -log [logdir] -- alternate directory for logfiles -run [rundir] -- alternate directory for runtime files -db [dbdir] -- alternate directory for the internal database -mod [moddir] -- alternate directory for modules -htdocs [htdocsdir] -- alternate directory for htdocs -scripts [scriptsdir] -- alternate directory for scripts -temp [directory] -- alternate directory for temporary files -grammar [directory] -- alternate directory for grammar files -certs [directory] -- alternate directory for certificates -recordings [directory] -- alternate directory for recordings -storage [directory] -- alternate directory for voicemail storage -cache [directory] -- alternate directory for cache files -sounds [directory] -- alternate directory for sound files ‘‘‘ ? 启动、关闭 如果不带参数的话，直接在命令行中输入 freeswitch 就能启动，当你看到下面所示内容时基本就是启动正常了 # 启动freeswitch freeswitch # 关闭freeswitch shutdown ? [email?protected]> 2019-06-06 09:48:51.667336 [CONSOLE] switch_core.c:2438 .=============================================================. | _____ ______ _____ _____ ____ _ _ | | | ___| __ ___ ___/ ___ / /_ _|_ _/ ___| | | | | | | |_ | ‘__/ _ / _ ___ / / / | | | || | | |_| | | | | _|| | | __/ __/___) | V V / | | | || |___| _ | | | |_| |_| ___|___|____/ _/_/ |___| |_| ____|_| |_| | | | .=============================================================. | Anthony Minessale II,Michael Jerris,Brian West,Others | | FreeSWITCH (http://www.freeswitch.org) | | Paypal Donations Appreciated: [email?protected] | | Brought to you by ClueCon http://www.cluecon.com/ | .=============================================================. .=======================================================================================================. | _ _ ____ _ ____ | | / _ __ _ __ _ _ __ _| | / ___| |_ _ ___ / ___|___ _ __ | | / _ | ‘_ | ‘_ | | | |/ _` | | | | | | | | |/ _ | / _ | ‘_ | | / ___ | | | | | | | |_| | (_| | | | |___| | |_| | __/ |__| (_) | | | | | | /_/ __| |_|_| |_|__,_|__,_|_| ____|_|__,_|___|_______/|_| |_| | | | | ____ _____ ____ ____ __ | | | _ _ _/ ___| / ___|___ _ __ / _| ___ _ __ ___ _ __ ___ ___ | | | |_) || || | | | / _ | ‘_ | |_ / _ ‘__/ _ ‘_ / __/ _ | | | _ < | || |___ | |__| (_) | | | | _| __/ | | __/ | | | (_| __/ | | |_| _|_| ____| _______/|_| |_|_| ___|_| ___|_| |_|______| | | | | ____ _ ____ | | / ___| |_ _ ___ / ___|___ _ __ ___ ___ _ __ ___ | | | | | | | | |/ _ | / _ | ‘_ / __/ _ | ‘_ ` _ | | | |___| | |_| | __/ |__| (_) | | | | _ | (_| (_) | | | | | | | | ____|_|__,_|___|_______/|_| |_| (_) ______/|_| |_| |_| | | | .=======================================================================================================. 2019-06-06 09:48:51.667349 [INFO] switch_core.c:2447 FreeSWITCH Version 1.8.5~64bit ( 64bit) FreeSWITCH Started Max Sessions [1000] Session Rate [30] SQL [Enabled] ? 如果有错误信息，会以红色字体的形式提现出来，这时需要自己去排查错误 ? 后台启动、关闭 当然我们一般运行 FreeSWITCH 都是以后台的形式 # 后台启动 freeswitch -nc # 关闭后台freeswitch freeswitch -stop ? 查看相关日志 我们可以首先查看一下FreeSWITCH是否正常启动 netstat -anp | grep freeswitch
‘‘‘ tcp 0 0 172.17.0.7:8081 0.0.0.0:* LISTEN 14252/freeswitch tcp 0 0 172.17.0.7:8082 0.0.0.0:* LISTEN 14252/freeswitch tcp 0 0 172.17.0.7:7443 0.0.0.0:* LISTEN 14252/freeswitch tcp 0 0 172.17.0.7:5080 0.0.0.0:* LISTEN 14252/freeswitch tcp 0 0 172.17.0.7:5060 0.0.0.0:* LISTEN 14252/freeswitch tcp 0 0 172.17.0.7:2855 0.0.0.0:* LISTEN 14252/freeswitch tcp 0 0 172.17.0.7:2856 0.0.0.0:* LISTEN 14252/freeswitch tcp 0 0 172.17.0.7:5066 0.0.0.0:* LISTEN 14252/freeswitch udp 0 0 0.0.0.0:1337 0.0.0.0:* 14252/freeswitch udp 0 0 172.17.0.7:52133 172.17.0.1:5351 ESTABLISHED 14252/freeswitch udp 0 0 172.17.0.7:5060 0.0.0.0:* 14252/freeswitch udp 0 0 172.17.0.7:5080 0.0.0.0:* 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2109650 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2105745 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2107133 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2105746 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2108033 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2107132 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2108032 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2109651 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2107134 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2107131 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2102897 14252/freeswitch unix 3 [ ] STREAM CONNECTED 2102898 14252/freeswitch ‘‘‘ ? 后台启动了FreeSWITCH后我们需要查看相关日志需要用 fs_cli 命令，如果出现下图内容就说明连上了 fs_cli ‘‘‘ .=======================================================. | _____ ____ ____ _ ___ | | | ___/ ___| / ___| | |_ _| | | | |_ ___ | | | | | | | | | _| ___) | | |___| |___ | | | | |_| |____/ ____|_____|___| | | | .=======================================================. | Anthony Minessale II,Ken Rice,| | Michael Jerris,Travis Cross | | FreeSWITCH (http://www.freeswitch.org) | | Paypal Donations Appreciated: [email?protected] | | Brought to you by ClueCon http://www.cluecon.com/ | .=======================================================. .=======================================================================================================. | _ _ ____ _ ____ | | / _ __ _ __ _ _ __ _| | / ___| |_ _ ___ / ___|___ _ __ | | / _ | ‘_ | ‘_ | | | |/ _` | | | | | | | | |/ _ | / _ | ‘_ | | / ___ | | | | | | | |_| | (_| | | | |___| | |_| | __/ |__| (_) | | | | | | /_/ __| |_|_| |_|__,_|_| ____|_|__,_|___|_______/|_| |_| | | | | ____ _____ ____ ____ __ | | | _ _ _/ ___| / ___|___ _ __ / _| ___ _ __ ___ _ __ ___ ___ | | | |_) || || | | | / _ | ‘_ | |_ / _ ‘__/ _ ‘_ / __/ _ | | | _ < | || |___ | |__| (_) | | | | _| __/ | | __/ | | | (_| __/ | | |_| _|_| ____| _______/|_| |_|_| ___|_| ___|_| |_|______| | | | | ____ _ ____ | | / ___| |_ _ ___ / ___|___ _ __ ___ ___ _ __ ___ | | | | | | | | |/ _ | / _ | ‘_ / __/ _ | ‘_ ` _ | | | |___| | |_| | __/ |__| (_) | | | | _ | (_| (_) | | | | | | | | ____|_|__,_|___|_______/|_| |_| (_) ______/|_| |_| |_| | | | .=======================================================================================================. Type /help <enter> to see a list of commands [This app Best viewed at 160x60 or more..] +OK log level [7] [email?protected]> ‘‘‘ ? 问题解决 如果 fs_cli 命令连不上，报错信息如下： [ERROR] fs_cli.c:1679 main() Error Connecting [] Usage: fs_cli [-H <host>] [-P <port>] [-p <secret>] [-d <level>] [-x command] [-t <timeout_ms>] [profile] -?,-h --help Usage Information -H,--host=hostname Host to connect -P,--port=port Port to connect (1 - 65535) -u,--user=[email?protected] [email?protected] -p,--password=password Password -i,--interrupt Allow Control-c to interrupt -x,--execute=command Execute Command and Exit -l,--loglevel=command Log Level -U,--log-uuid Include UUID in log output -S,--log-uuid-short Include shortened UUID in log output -q,--quiet Disable logging -r,--retry Retry connection on failure -R,--reconnect Reconnect if disconnected -d,--debug=level Debug Level (0 - 7) -b,--batchmode Batch mode -t,--timeout Timeout for API commands (in miliseconds) -T,--connect-timeout Timeout for socket connection (in miliseconds) -n,--no-color Disable color ? 这时需要修改一下连接IP，首先我们需要启动 enable the mod_event_socket 模块，文件?位于?/usr/local/freeswitch/conf/autoload_configs/modules.conf.xml ，然后修改默认的启动IP，修改文件位于??/usr/local/freeswitch/conf/autoload_configs/event_socket.conf.xml ，然后重启 FreeSWITCH 即可 nano /usr/local/freeswitch/conf/autoload_configs/event_socket.conf.xml ‘‘‘ <configuration name="event_socket.conf" description="Socket Client"> <settings> <param name="nat-map" value="false"/> <param name="listen-ip" value="::"/> <param name="listen-port" value="8021"/> <param name="password" value="ClueCon"/> <!--<param name="apply-inbound-acl" value="loopback.auto"/>--> <!--<param name="stop-on-bind-error" value="true"/>--> </settings> </configuration> ‘‘‘ # 将上面的<param name="listen-ip" value="::"/>改为<param name="listen-ip" value="0.0.0.0"/> （编辑：李大同） 【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容! |
