linux nand flash驱动编写
|
很长一段时间，nand flash都是嵌入式的标配产品。nand flash价格便宜，存储量大，适用于很多的场景。现在很普及的ssd，上面的存储模块其实也是由一块一块nand flash构成的。对于linux嵌入式来说，开始uboot的加载是硬件完成的，中期的kernel加载是由uboot中的nand flash驱动完成的，而后期的rootfs加载，这就要靠kernel自己来完成了。当然，这次还是以三星s3c芯片为例进行说明。 1、nand flash驱动在什么地方，可以从drviers/mtd/Makefile来看 obj-y += chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/ 2、nand在mtd下面，是作为一个单独目录保存的，这时应该查看nand下的Kconfig config MTD_NAND_S3C2410 tristate "NAND Flash support for Samsung S3C SoCs" depends on ARCH_S3C24XX || ARCH_S3C64XX help This enables the NAND flash controller on the S3C24xx and S3C64xx SoCs No board specific support is done by this driver,each board must advertise a platform_device for the driver to attach. config MTD_NAND_S3C2410_DEBUG bool "Samsung S3C NAND driver debug" depends on MTD_NAND_S3C2410 help Enable debugging of the S3C NAND driver config MTD_NAND_S3C2410_CLKSTOP bool "Samsung S3C NAND IDLE clock stop" depends on MTD_NAND_S3C2410 default n help Stop the clock to the NAND controller when there is no chip selected to save power. This will mean there is a small delay when the is NAND chip selected or released,but will save approximately 5mA of power when there is nothing happening. 3、不难发现，MTD_NAND_S3C2410才是那个真正的macro，尝试在Makefile找文件 obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o 4、查看s3c2410.c文件，看看基本结构构成
static struct platform_driver s3c24xx_nand_driver = {
.probe = s3c24xx_nand_probe,.remove = s3c24xx_nand_remove,.suspend = s3c24xx_nand_suspend,.resume = s3c24xx_nand_resume,.id_table = s3c24xx_driver_ids,.driver = {
.name = "s3c24xx-nand",.of_match_table = s3c24xx_nand_dt_ids,},};
module_platform_driver(s3c24xx_nand_driver);
5、继续分析s3c24xx_nand_probe函数 s3c2410_nand_init_chip(info,nmtd,sets); 6、之所以从中摘出了s3c2410_nand_init_chip这个函数，是因为里面进行了函数注册 类似的函数还有s3c2410_nand_update_chip函数
chip->write_buf = s3c2410_nand_write_buf;
chip->read_buf = s3c2410_nand_read_buf;
chip->select_chip = s3c2410_nand_select_chip;
chip->chip_delay = 50;
nand_set_controller_data(chip,nmtd);
chip->options = set->options;
chip->controller = &info->controller;
switch (info->cpu_type) {
case TYPE_S3C2410:
chip->IO_ADDR_W = regs + S3C2410_NFDATA;
info->sel_reg = regs + S3C2410_NFCONF;
info->sel_bit = S3C2410_NFCONF_nFCE;
chip->cmd_ctrl = s3c2410_nand_hwcontrol;
chip->dev_ready = s3c2410_nand_devready;
break;
case TYPE_S3C2440:
chip->IO_ADDR_W = regs + S3C2440_NFDATA;
info->sel_reg = regs + S3C2440_NFCONT;
info->sel_bit = S3C2440_NFCONT_nFCE;
chip->cmd_ctrl = s3c2440_nand_hwcontrol;
chip->dev_ready = s3c2440_nand_devready;
chip->read_buf = s3c2440_nand_read_buf;
chip->write_buf = s3c2440_nand_write_buf;
break;
case TYPE_S3C2412:
chip->IO_ADDR_W = regs + S3C2440_NFDATA;
info->sel_reg = regs + S3C2440_NFCONT;
info->sel_bit = S3C2412_NFCONT_nFCE0;
chip->cmd_ctrl = s3c2440_nand_hwcontrol;
chip->dev_ready = s3c2412_nand_devready;
if (readl(regs + S3C2410_NFCONF) & S3C2412_NFCONF_NANDBOOT)
dev_info(info->device,"System booted from NANDn");
break;
}
7、抓住了函数接口，就找到了基本逻辑。 对于框架来说，它不关心你的代码如何实现。只要你按照它的接口写，就能让上层正常获得数据。platform、usb、pci这都是一种接口形式，具体实现还要按照各个具体功能模块来实现才行。 8、为什么我们都用s3c芯片进行举例 因为它用的场景最多，学习资料最全，对于新手来说，这会少很多麻烦。 9、这个驱动依赖的kernel版本是什么 这里最有的代码都是按照最新4.16的版本进行分析的，大家可以直接查看这里的地址。 以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持编程小技巧。 您可能感兴趣的文章:
（编辑：李大同） 【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容! |