1.nfs引导
boot -z -elf y.y.y.y:vmlinuz-xxxx 'root=/dev/nfs nfsroot=y.y.y.y:/opt/nfsroot ip=dhcp rw'
2.flash引导
boot -z -elf flash0.mrskernel: 'ubi.mtd=mrs rootfstype=ubifs root=ubi0:rootfs rootflags=sync bmem=126944K@100M bmem=32800K@229344K ' "
3.带CM的flash引导
setenv -p STARTUP "ecm 32 32; boot -z -elf flash0.mrskernel: 'ubi.mtd=mrs rootfstype=ubifs root=ubi0:rootfs rootflags=sync bmem=126944K@100M bmem=32800K@229344K ' "
4.烧写
flash -noheader 10.0.14.188:/jieen/bcm7019C0/1104/cfe_force flash0.cfe
flash -noheader 10.0.14.188:/jieen/bcm7019C0/1104/vmlinuz-7125c0 flash0.mrskernel
flash -noheader usbdisk0:/c.bmp flash0.splash
boot -z -elf 10.0.14.188:/jieen/bcm7019C0/1104/vmlinuz-initrd-7125c0
boot -z -elf 10.0.14.188:jieen/vmlinuz-7550b0 'root=/dev/nfs nfsroot=10.0.14.188:/home/sf6/jieen/target/fs ip=dhcp rw'
boot -z -elf 10.0.14.188:jieen/vmlinuz-initrd-7550a0 'root=/dev/nfs nfsroot=10.0.14.188:/home/sf6/jieen/target/7580 ip=dhcp rw'
5.保存数据
save 10.0.14.188:kernel.bin 0xa5d00000 0x360000
6.设置快捷键 setenv -p F2 "ifconfig eth0 -addr=192.168.0.2" tftp -g -r jieen/bcm7019C0/97125bnm.128nand_plus_nand.tar 10.0.14.188 7设置mac地址 macprog2 00-01-02-04-03-08
