flash大小选择和添加mtd的data分区 -- linux内核

需要修改位置：

(1)/linux-2.6/arch/mips/rt2880/Kconfig

(2)/linux-2.6/drivers/mtd/maps/ralink-flash.h

(3)/linux-2.6/drivers/mtd/maps/ralink-spi.c

(4)/vendors/Ralink/RT5350/config/4M_32M_config.linux-2.6(make dep 后生成的config.h)

(1)添加menuconfig中选项

choice
	prompt "Flash Size"
	default RT2880_FLASH_4M
	
config T2880_FLASH_2M
        bool "2M"

config RT2880_FLASH_4M
        bool "4M"

config RT2880_FLASH_8M
        bool "8M"

config RT2880_FLASH_16M
        bool "16M"
	
config RT2880_FLASH_32M
        bool "32M"
#	select RT2880_FLASH_32M
endchoice

#Data分区	#注释部分不无效
choice
	prompt "Flash Data Size"
	default RT2880_FLASH_DATA_320KB

config RT2880_FLASH_DATA_0KB
        bool "none(0)KB"
		
#config RT2880_FLASH_DATA_64KB
#        bool "0x10000(64)KB"
		
#config RT2880_FLASH_DATA_128KB
#        bool "0x20000(128)KB"
		
#config RT2880_FLASH_DATA_192KB
#        bool "0x30000(192)KB"
		
#config RT2880_FLASH_DATA_256KB
#        bool "0x40000(256)KB"
		
config RT2880_FLASH_DATA_320KB
        bool "0x50000(320)KB"

config RT2880_FLASH_DATA_384KB
        bool "0x60000(384)KB"

endchoice	

config MTD_PHYSMAP_DATA_LEN
       hex 
       default 0x0 if RT2880_FLASH_DATA_0KB
       default 0x10000 if RT2880_FLASH_DATA_64KB
       default 0x20000 if RT2880_FLASH_DATA_128KB
       default 0x30000 if RT2880_FLASH_DATA_192KB
       default 0x40000 if RT2880_FLASH_DATA_256KB
       default 0x50000 if RT2880_FLASH_DATA_320KB
       default 0x60000 if RT2880_FLASH_DATA_384KB

choice
 

#if defined (CONFIG_RT2880_FLASH_32M)
#define MTD_BOOT_PART_SIZE	0x40000
#define	MTD_CONFIG_PART_SIZE	0x20000
#define	MTD_FACTORY_PART_SIZE	0x20000
#define MTD_DATA_PAPT_SIZE  CONFIG_MTD_PHYSMAP_DATA_LEN/**/
#else
#if defined (RECONFIG_PARTITION_SIZE)
#if !defined (MTD_BOOT_PART_SIZE)
#error "Please define MTD_BOOT_PART_SIZE"
#endif
#if !defined (MTD_CONFIG_PART_SIZE)
#error "Please define MTD_CONFIG_PART_SIZE"
#endif
#if !defined (MTD_FACTORY_PART_SIZE)
#error "Please define MTD_FACTORY_PART_SIZE"
#endif
#else
#define MTD_BOOT_PART_SIZE	0x30000
#define	MTD_CONFIG_PART_SIZE	0x10000
#define	MTD_FACTORY_PART_SIZE	0x10000
#define MTD_DATA_PAPT_SIZE  CONFIG_MTD_PHYSMAP_DATA_LEN<span style="font-family: Arial,Helvetica,sans-serif;">/*添加data分区长度*/</span>
#endif
#endif




#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING
#define CONFIG_MTD_KERNEL_PART_SIZ 0
#endif
#define MTD_ROOTFS_PART_SIZE	IMAGE1_SIZE - (MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE 
					+ MTD_FACTORY_PART_SIZE + CONFIG_MTD_KERNEL_PART_SIZ  + MTD_DATA_PAPT_SIZE)
#define	MTD_KERN_PART_SIZE	CONFIG_MTD_KERNEL_PART_SIZ
//#define	MTD_KERN_PART_SIZE	0x310000
#else //CONFIG_RT2880_ROOTFS_IN_ROM
#define MTD_KERN_PART_SIZE	IMAGE1_SIZE - (MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE 
					+ MTD_FACTORY_PART_SIZE + MTD_DATA_PAPT_SIZE)/*计算除去data分区长度后内存分区长度*/
//#define	MTD_KERN_PART_SIZE	0x310000
#endif

(3)定义data分区

static struct mtd_partition rt2880_partitions[] = {
	{
                name:           "ALL",size:           MTDPART_SIZ_FULL,offset:         0,},/* Put your own partition definitions here */
        {
                name:           "Bootloader",size:           MTD_BOOT_PART_SIZE,{
                name:           "Config",size:           MTD_CONFIG_PART_SIZE,offset:         MTDPART_OFS_APPEND
        },{
                name:           "Factory",size:           MTD_FACTORY_PART_SIZE,offset:         MTDPART_OFS_APPEND
#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
        },{
                name:           "Kernel",size:           MTD_KERN_PART_SIZE,offset:         MTDPART_OFS_APPEND,{
                name:           "RootFS",size:           MTD_ROOTFS_PART_SIZE,#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING
        },{
                name:           "Kernel_RootFS",size:           MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE,offset:         MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE,#endif
#else //CONFIG_RT2880_ROOTFS_IN_RAM
        },#endif//CONFIG_RT2880_ROOTFS_IN_FLASH

#ifdef CONFIG_DUAL_IMAGE
        },{
                name:           "Kernel2",size:           MTD_KERN2_PART_SIZE,offset:         MTD_KERN2_PART_OFFSET,#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
        },{
                name:           "RootFS2",size:           MTD_ROOTFS2_PART_SIZE,offset:         MTD_ROOTFS2_PART_OFFSET,#endif
#endif//CONFIG_DUAL_IMAGE
/*DATA分区添加部分*/
		},{
			name:		"Date",/* mtdblock5 */
			size:		MTD_DATA_PAPT_SIZE,offset: 	MTDPART_OFS_APPEND,/*偏移量，data开头位置*/
        }
};