PROFIBUS ARM9 SoM with User Programmable FPGA

http://www.mitydsp.com/products-services/cpu-engines/mityarm-1810F/

PROFIBUS ARM9 SoM with User Programmable FPGA?PROFIBUS Systems requiring an embedded CPU board that can provide an array of hardware interfaces as well as rich user interfaces will find the MityARM-1810F System-on-Module (SoM) to be an appropriate choice. The MityARM-1810F features the new PROFIBUS enabled Sitara AM1810 ARM CPU from Texas Instruments married to a Xilinx FPGA. Providing a certified PROFIBUS solution utilizing the PRU,Texas Instruments has made it easier and more cost effective for system designers to interface to PROFIBUS using a Sitara solution. The Xilinx Spartan-6 FPGA on these modules serves to expand the available I/O capabilities of this module beyond PROFIBUS and the other interfaces directly available on the Sitara as well as provide the opportunity for designers to develop intensive math coprocessing without requiring a complete DSP.An overview of the OMAP-L138,Sitara AM1810,Sitara AM1808 and C6748 family of MityDSP modules can be found at the following link. TI Applications Processor ARM926EJ-S MPU Max CPU Speed 375 MHz L1 Program Cache 16 KB L1 Data Cache 16 KB Internal RAM 8 KB System Memory RAM 128 MB NOR Flash 8 MB NAND Flash 256 MB FPGA Xilinx Spartan-6 XC6SLX16 Slices 2,278 Logic Cells 14,579 Block RAM 576 KbStandard Interfaces 10/100 EMAC SATA eHRPWM USB (2) McASP Timers UART (3) McBSP (2) uPP MMC/SD (2) SPI (2) uHPI LCD I2C (2) PROFIBUS* VPIF eCAP Note: Interfaces in the AM1810 share I/O pins,contact Critical Link for information on whether your specific set of interfaces are effected by on-chip pin muxing.Note: PROFIBUS interface supports 6Mbps,3Mbps,1.5Mbps,500kbps,187.5kbps,93.73kbps,19.2kbps,and 9.6kbps operation. Software Support Real-time Linux Operating System uBoot QNX Real-time Operating System Windows Embedded Capable Qt Embedded Graphics Development Tool Subsystem Texas Instruments Code Composer Studio ARM9 GNU Toolchain ARM9 Xilinx ISE Xilinx FPGA