lcd flash sdram

lcd
make menuconfig:
Device Drivers? ---> Graphics support? ---><*> Support for frame buffer devices? ---><*>?? S3C2410 LCD framebuffer support
device node: /dev/fb0
file: drivers/video/s3c2410fb.c

Another configuration item in the same page is: LCD select (7 inch 800x480 TFT LCD)? .then 7 inch lcd will work.
Do not worry about touchscreen,we just do calibrating when system on and it will work.

( ) 3.5 inch 240X320 Toppoly LCD------ CONFIG_FB_S3C2410_T240320
( ) 3.5 inch 240X320 NEC LCD -----------CONFIG_FB_S3C2410_N240320:
( ) 8 inch 640X480 L80 LCD--------------CONFIG_FB_S3C2410_TFT640480:
(X) 7 inch 800x480 TFT LCD-------------CONFIG_FB_S3C2410_TFT800480:
( ) VGA 1024x768 ----------------------ONFIG_FB_S3C2410_VGA1024768:
search "if?defined" and highlight if using firefox

//mach-mini2440.c
/* LCD driver info */

#if defined(CONFIG_FB_S3C2410_N240320)

#define LCD_WIDTH 240
#define LCD_HEIGHT 320
#define LCD_PIXCLOCK 100000

#define LCD_RIGHT_MARGIN 36
#define LCD_LEFT_MARGIN 19
#define LCD_HSYNC_LEN 5

#define LCD_UPPER_MARGIN 1
#define LCD_LOWER_MARGIN 5
#define LCD_VSYNC_LEN 1

#elif defined(CONFIG_FB_S3C2410_N480272)

#define LCD_WIDTH 480
#define LCD_HEIGHT 272
#define LCD_PIXCLOCK 100000

#define LCD_RIGHT_MARGIN 36
#define LCD_LEFT_MARGIN 19
#define LCD_HSYNC_LEN 5

#define LCD_UPPER_MARGIN 1
#define LCD_LOWER_MARGIN 5
#define LCD_VSYNC_LEN 1

#elif defined(CONFIG_FB_S3C2410_TFT640480)
#define LCD_WIDTH 640
#define LCD_HEIGHT 480
#define LCD_PIXCLOCK 40000

#define LCD_RIGHT_MARGIN 67 
#define LCD_LEFT_MARGIN 40
#define LCD_HSYNC_LEN 31

#define LCD_UPPER_MARGIN 5
#define LCD_LOWER_MARGIN 25
#define LCD_VSYNC_LEN 1

#elif defined(CONFIG_FB_S3C2410_T240320)/*configuration*/
#define LCD_WIDTH 240
#define LCD_HEIGHT 320
#define LCD_PIXCLOCK 170000
#define LCD_RIGHT_MARGIN 25
#define LCD_LEFT_MARGIN 0
#define LCD_HSYNC_LEN 4
#define LCD_UPPER_MARGIN 1
#define LCD_LOWER_MARGIN 4
#define LCD_VSYNC_LEN 1
#define LCD_CON5 (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_INVVDEN | S3C2410_LCDCON5_INVVFRAME | S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVCLK | S3C2410_LCDCON5_HWSWP ) 

#elif defined(CONFIG_FB_S3C2410_X240320)
#define LCD_WIDTH 240
#define LCD_HEIGHT 320
#define LCD_PIXCLOCK 170000
#define LCD_RIGHT_MARGIN 25
#define LCD_LEFT_MARGIN 0
#define LCD_HSYNC_LEN 4
#define LCD_UPPER_MARGIN 0
#define LCD_LOWER_MARGIN 4
#define LCD_VSYNC_LEN 9
#define LCD_CON5 (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_INVVDEN | S3C2410_LCDCON5_INVVFRAME | S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVCLK | S3C2410_LCDCON5_HWSWP ) 

#elif defined(CONFIG_FB_S3C2410_TFT800480)
#define LCD_WIDTH 800
#define LCD_HEIGHT 480
#define LCD_PIXCLOCK 40000

#define LCD_RIGHT_MARGIN 67
#define LCD_LEFT_MARGIN 40
#define LCD_HSYNC_LEN 31

#define LCD_UPPER_MARGIN 25
#define LCD_LOWER_MARGIN 5
#define LCD_VSYNC_LEN 1

#elif defined(CONFIG_FB_S3C2410_VGA1024768)
#define LCD_WIDTH 1024
#define LCD_HEIGHT 768
#define LCD_PIXCLOCK 80000

#define LCD_RIGHT_MARGIN 15
#define LCD_LEFT_MARGIN 199
#define LCD_HSYNC_LEN 15

#define LCD_UPPER_MARGIN 1
#define LCD_LOWER_MARGIN 1
#define LCD_VSYNC_LEN 1
#define LCD_CON5 (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_HWSWP)

#endif

#if defined (LCD_WIDTH)

static struct s3c2410fb_display mini2440_lcd_cfg __initdata = {

#if !defined (LCD_CON5)
	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
			  S3C2410_LCDCON5_INVVLINE |
			  S3C2410_LCDCON5_INVVFRAME |
			  S3C2410_LCDCON5_PWREN |
			  S3C2410_LCDCON5_HWSWP,#else
	.lcdcon5	= LCD_CON5,#endif

	.type		= S3C2410_LCDCON1_TFT,.width		= LCD_WIDTH,.height		= LCD_HEIGHT,.pixclock	= LCD_PIXCLOCK,.xres		= LCD_WIDTH,.yres		= LCD_HEIGHT,.bpp		= 16,.left_margin	= LCD_LEFT_MARGIN + 1,.right_margin	= LCD_RIGHT_MARGIN + 1,.hsync_len	= LCD_HSYNC_LEN + 1,.upper_margin	= LCD_UPPER_MARGIN + 1,.lower_margin	= LCD_LOWER_MARGIN + 1,.vsync_len	= LCD_VSYNC_LEN + 1,};


static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
	.displays	= &mini2440_lcd_cfg,.num_displays	= 1,.default_display = 0,.gpccon =       0xaa955699,.gpccon_mask =  0xffc003cc,.gpcup =        0x0000ffff,.gpcup_mask =   0xffffffff,.gpdcon =       0xaa95aaa1,.gpdcon_mask =  0xffc0fff0,.gpdup =        0x0000faff,.gpdup_mask =   0xffffffff,.lpcsel		= 0xf82,};

#endif

/************************************************************************************************/
trace fbi->dev->platform_data:
s3c2410fb.c
??? struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
devs.c

void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
{
	struct s3c2410fb_mach_info *npd;

	npd = kmalloc(sizeof(*npd),GFP_KERNEL);
	if (npd) {
		memcpy(npd,pd,sizeof(*npd));
		s3c_device_lcd.dev.platform_data = npd;
	} else {
		printk(KERN_ERR "no memory for LCD platform datan");
	}
}

mach-mini2440.c

static void __init mini2440_machine_init(void)
{
#if defined (LCD_WIDTH)
	s3c24xx_fb_set_platdata(&mini2440_fb_info);
#endif
...
}

/************************************************************************************************/
http://topic.csdn.net/u/20101025/16/62ab9b17-91e2-4154-9e01-97ffd6ec4e5b.html
http://blog.csdn.net/lanmanck/article/details/4773175
http://blog.csdn.net/eqwewr/article/details/6725655
http://blog.csdn.net/eqwewr/article/details/7079442
/************************************************************************************************/
nand
?? Device Drivers? --->? ?<*> Memory Technology Device (MTD) support? --->[*]?? MTD partitioning support
????????????????????????????????????????????????????????????????????????? <*>?? Direct char device access to MTD devices
????????????????????????????????????????????????????????????????????????? <*>?? Caching block device access to MTD devices
????????????????????????????????????????????????????????????????????????? <*>?? NAND Device Support? ---> ?<*>?? NAND Flash support for Samsung S3C SoCs?
obj-$(CONFIG_MTD_NAND_S3C2410)?? ??? ?+= s3c2410.o
/drivers/mtd/nand/s3c2410.c
the file nand_ids.c in the same directory indicates supported chips