加入收藏 | 设为首页 | 会员中心 | 我要投稿 李大同 (https://www.lidatong.com.cn/)- 科技、建站、经验、云计算、5G、大数据,站长网!
当前位置: 首页 > 百科 > 正文

Secure Digital I/O, SD Card

发布时间:2020-12-15 06:26:01 所属栏目:百科 来源:网络整理
导读:? Secure Digital I/O Card Description Secure Digital Input/Output [SDIO] is a flash based removable memory card. The card format may also be used for other device functions in addition to data storage. Secure Digital IO uses a 9-Pin connec
?

Secure Digital I/O Card Description

Secure Digital Input/Output [SDIO] is a flash based removable memory card. The card format may also be used for other device functions in addition to data storage. Secure Digital IO uses a 9-Pin connector [1 row of 9 pins]. SDIO is based on the Secure Digital SD card. SDIO is compatible with the SD memory card,and fits in the same socket.

The Secure Digital I/O card dimensions are: 24mm wide x 32mm long x 2.1mm thick.

There are two types of SDIO cards; a full-speed version,and a slow-speed version. The full-speed version will operate with a 1-bit and 4-bit SD transfer mode,both with a clock ranging from 0Hz to 25MHz. The 4-bit version operating at 25MHz has a transfer rate of 100Mbps. The slow-speed version will use the 1-bit mode and may have the 4-bit mode,but only operates at a transfer rate of between 0Hz and 400kHz. The slow-speed version is not intended for memory functions. The SDIO card support the SPI bus interface. The SDIO mechanical form factor is shown above; however a few gaps "lock notches" are not shown. The SDIO card may exceed 24mm in width after 37mm in length,and the width may be thicker then 2.1mm after 37mm in length.

Secure Digital I/O Card,Pin Out

Secure Digital I/O Pinout
Pin #
SD 4-bit Mode
SD 1-bit Mode
SPI Mode
1 CD/DAT[3] Data Line 3 N/C Not Used CS Card Select
2 CMD Command Line CMD Command Line DI Data Input
3 VSS1 Ground VSS1 Ground VSS1 Ground
4 VDD Supply Voltage VDD Supply Voltage VDD Supply Voltage
5 CLK Clock CLK Clock SCLK Clock
6 Vss2 Ground Vss2 Ground Vss2 Ground
7 DAT[0] Data Line 0 DATA Data Line DO Data Output
8 DAT[1] Data Line 1 / Interrupt IRQ Interrupt IRQ Interrupt
9 DAT[2] Data Line 2 /Read Wait RW Read Wait NC Not Used

(编辑:李大同)

【声明】本站内容均来自网络,其相关言论仅代表作者个人观点,不代表本站立场。若无意侵犯到您的权利,请及时与联系站长删除相关内容!

    推荐文章
      热点阅读