华为交换机端口聚合
|
介绍了两种模式下的典型应用场景举例。 1、 配置手工负载分担模式链路聚合示例 2 、配置静态LACP 模式链路聚合示例 配置手工负载分担模式链路聚合示例 拓扑：
配置思路 1、创建Eth-trunk; 2、加入Eth-trunk的成员 说明： 创建Eth-Trunk 后，缺省的工作模式为手工负载分担模式，所以，缺省情况下，不需要配置 其模式为手工负载分担模式。如果当前模式已经配置为其它模式，可以使用mode 命令更改 配置步骤： A、创建Eth-trunk #配置杭州9312 <Huawei>sys Enter system view,return user view with Ctrl+Z. [Huawei]sysname hangzhou-zhongya9312 [hangzhou-zhongya9312]int Eth-Trunk 1 [hangzhou-zhongya9312-Eth-Trunk1]quit #配置上海9312 <Huawei>sys Enter system view,return user view with Ctrl+Z. [Huawei]sysname shanghai-zhongya9312 [shanghai-zhongya9312]int Eth-Trunk 1 [shanghai-zhongya9312-Eth-Trunk1]quit [shanghai-zhongya9312] B、加入Eth-trunk的成员接口 #配置杭州9312 [hangzhou-zhongya9312]int GigabitEthernet 0/0/1 [hangzhou-zhongya9312-GigabitEthernet0/0/1]eth-trunk 1 [hangzhou-zhongya9312-GigabitEthernet0/0/1]quit [hangzhou-zhongya9312]int GigabitEthernet 0/0/2 [hangzhou-zhongya9312-GigabitEthernet0/0/2]eth-trunk 1 [hangzhou-zhongya9312-GigabitEthernet0/0/2]quit #配置上海9312 [shanghai-zhongya9312]int g0/0/1 [shanghai-zhongya9312-GigabitEthernet0/0/1]eth-trunk 1 [shanghai-zhongya9312-GigabitEthernet0/0/1]quit [shanghai-zhongya9312]int g0/0/2 [shanghai-zhongya9312-GigabitEthernet0/0/2]eth-trunk 1 [shanghai-zhongya9312-GigabitEthernet0/0/2]quit C、验证配置结果 在任意视图下执行display trunkmembership 命令，检查Eth-Trunk 1 是否创建成 功，及成员接口是否正确加入，以杭州9312为例。 [hangzhou-zhongya9312]dis trunkmembership eth-trunk 1 Trunk ID: 1 Used status: VALID TYPE: ethernet Working Mode : Normal Number Of Ports in Trunk = 2 Number Of Up Ports in Trunk = 2 Operate status: up Interface GigabitEthernet0/0/1,valid,operate up,weight=1 Interface GigabitEthernet0/0/2,weight=1 [hangzhou-zhongya9312] ping 测试 [hangzhou-zhongya9312]ping 172.40.1.7 PING 172.40.1.7: 56 data bytes,press CTRL_C to break Reply from 172.40.1.7: bytes=56 Sequence=1 ttl=255 time=50 ms Reply from 172.40.1.7: bytes=56 Sequence=2 ttl=255 time=50 ms Reply from 172.40.1.7: bytes=56 Sequence=3 ttl=255 time=50 ms Reply from 172.40.1.7: bytes=56 Sequence=4 ttl=255 time=30 ms Reply from 172.40.1.7: bytes=56 Sequence=5 ttl=255 time=50 ms --- 172.40.1.7 ping statistics --- 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 30/46/50 ms [hangzhou-zhongya9312] 配置文件 #杭州9312的配置单# [hangzhou-zhongya9312]dis cu # sysname hangzhou-zhongya9312 # vlan batch 3501 # cluster enable ntdp enable ndp enable # drop illegal-mac alarm # diffserv domain default # interface Vlanif1 # interface Vlanif3501 ip address 172.40.1.8 255.255.255.224 # interface Eth-Trunk1 description HangZhou--to--ShangHai--DWDM-huiju set flow-stat interval 10 port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 3501 stp disable # interface GigabitEthernet0/0/1 description hangzhou--to--shanghai--DWDM-CH21 eth-trunk 1 # interface GigabitEthernet0/0/2 description hangzhou--to--shanghai--DWDM-CH33 eth-trunk 1 # return #上海9312配置单# [shanghai-zhongya9312]dis cu # sysname shanghai-zhongya9312 # vlan batch 3501 # cluster enable ntdp enable ndp enable # interface Vlanif1 # interface Vlanif3501 ip address 172.40.1.7 255.255.255.224 # interface Eth-Trunk1 description SW--ShangHai--to--HangZhou--DWDM-huiju set flow-stat interval 10 port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 3501 stp disable # interface GigabitEthernet0/0/1 description shanghai--to--hangzhou--DWDM-CH21 eth-trunk 1 # interface GigabitEthernet0/0/2 description shanghai--to--hangzhou--DWDM-CH33 eth-trunk 1 # return （编辑：李大同） 【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容! |
