|
实验之一：链路聚合
华为S5700交换机两台，拓扑图如下：
在A交换机做如下配置
[A]interface Eth-Trunk 0
[A-Eth-Trunk0]
将A交互垃圾需要聚合的端口加入到Eth-Trunk 0中
[A]interface g0/0/1
[A-GigabitEthernet0/0/1]e
[A-GigabitEthernet0/0/1]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment...done.
[A]interface g0/0/2
[A-GigabitEthernet0/0/2]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment...done.
[A-GigabitEthernet0/0/2]
[A]dis eth-trunk 0
Eth-Trunk0's state information is:
WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
Operate status: up Number Of Up Port In Trunk: 2
--------------------------------------------------------------------------------
PortName Status Weight
GigabitEthernet0/0/1 Up 1
GigabitEthernet0/0/2 Up 1
[A]
在B交换机上进行如下配置
[B]interface Eth-Trunk 0
[B-Eth-Trunk0]quit
[B]
将B交换机需要聚合的端口加入到Eth-Trunk 0中
[B]int g0/0/1
[B-GigabitEthernet0/0/1]e
[B-GigabitEthernet0/0/1]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment...done.
[B-GigabitEthernet0/0/1]
[B-GigabitEthernet0/0/2]eth-trunk 0
Info: This operation may take a few seconds. Please wait for a moment...done.
[B-GigabitEthernet0/0/2]
[B]dis eth-trunk 0
Eth-Trunk0's state information is:
WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
Operate status: up Number Of Up Port In Trunk: 2
--------------------------------------------------------------------------------
PortName Status Weight
GigabitEthernet0/0/1 Up 1
GigabitEthernet0/0/2 Up 1
[B]
以上就是配置链路聚合的简单步骤，希望对大家有用！！shxke希望大家多多交流我网络方面的知识！！ （编辑：李大同）
【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!
|
